How To Use Portable Bidet | Instructions Bidet Portable

How To Use  Bidet Portable
sprayer for external use
usage
1,Unfold the sprayer for external use softly. (shown in Figure 6)

2,In case it slides and drops, please put the handheld part around your wrist, and push down the button when it is well held.(shown in Figure 7)

3.positioning the washing location from the front or oblique rear and push the button to wash. (shown in Figure 8)
Note: please use up the water in the liquid storage bucket or discard the water remained, otherwise, a water leakage can occur; please don’t put the sprayer for external use into your body when using.

The method to switch washing power between gears of strong and weak.
hold the pushing plate on the sprayer for external use by hand, slide down it till you hear a click sound, so as to switch the intensity of water flow.


Sprayer for internal use
Bidet Portable usage
1.add moderate fresh water or lotion into the liquid storage bucket , please check the scale indication on the bucket if you need to blend a women-only wash solution.

2please link the either end of the duct with the sprayer for internal use. (shown in Figure 11)

3,4. insert the sprayer for internal use into your body softly. Connect the other end of duct with the groove of shell, put the lifting handle around your wrist, push the button to wash. (shown in Figure 12)

Note: please make sure that the protruding part for positioning on the duct be aligned to the groove on the sprayer for internal use, before using, the sprayer for internal use needs to be boiled down by boiled water for disinfection, be sure not to use it alternately with other persons.
nursing sprayer
usage
1.Install the nursing sprayer
2. Open the injection port, add the wash solution, based on different washing aims, rotate the front end of nursing sprayer to choose different spraying ways.
3. the spraying ways include vaporific scrubbing and intensive flushing. (shown in Figure 14)

Note: make sure that the concave part for positioning on the sprayer be aligned to the groove on the shell. (shown in Figure 13)