How To install Toilet Fill Valve installation instruction

Water Level
Adjustment
Unit：mm
INSTRUCTION
1. Please read carefully the following instruction. In order to
avoid injuring body or damaging equipment, please install the
equipment following the instruction step by step.
2. The instructions are complied according to the up-to-date
production information. we reserve the rights to make the
changes about specifications, packaging and sullying without
prior notice.
3. When valve installed, the critical level mark on fill valve
(identified by a C.L mark on valve body) should be at least 1″
(=25.4mm) above top of overflow pipe.
4. We shall not be responsible for any failure of using any parts
from other companies.
5. Water temperature: 2℃-45℃
6. Water pressure: 0.02Mpa-0.8Mpa.
DO NOT USE OR DROP ANY CHLORINE OR ANY CHEMICAL
RELATED COMPONENTS. USE OF SUCH PRODUCTS WILL
(1) RESULT IN DAMAGE TO CISTERN COMPONENTS AND
MAY CAUSE FLOODING AND PROPERTY DAMAGE AND (2)
VOID WARRANTY. DO NOT OVERTIGHTEN OR
CISTERN/BOWL MAY CRACK.
(For more toilet parts,please contact us.)

1,Preparation
Please remove the worn out fittings and clean your cistern when you just install a new one,
there might be lots of impurities in your cistern so clean your cistern should be the first you do.
2. Water Level Adjustment
Please check the equipment first and make sure the equipment is no breakage
and missing parts
Rotating the screws to adjust the Working Line.
Notice: the screws can not stand up tp the tank cover
4. Fill Valve Cleaning
Please shut off water suply before filter cleaning.
As illustrated, take out the filter from inlet by using pliers or hook.
Flush the filter and the adapter.
Install clean filter into inlet and
connect the water supply tube as illustrated.