Toilet Flushing Sensor Illustration of Product

Toilet AI Flushing Sensor Illustration of Product 

Specification
Product Name： Toilet Flushing Sensor- QBO Type
Power：6 pieces of AA Alkaline or Lithium Batteries
Water Flush Method: Auto-induction ～Intelligent-cotrol, Two-stage Flush (Small / Large Volume)
Sensor Distance：Within 85cm + 5cm
Sensor Time：First Flush ((Small Water Volume): 13Sec.
Second Flush ((Large Water Volume): 2Min 20 Sec.
Application Water Tank Style: Central-pressing Type Toilet

                          Flush button(round appearance)located in he center of water tank

Dimension: 124×69×45（L×W×H）mm
Note:：This model is designed to use alkaline, lithium, and rechargeable lithium batteries.
2．Advantages

• Full sealed waterproof design, not afraid of moisture.
• Efficient power–saving sensor design.
• Battery–power(DC Power),No AC Power required.
• Back sticker installation, no need wall–breaking.
• Allow children, the elderly or people with limited mobility easy and convenient to use the toilet, also avoid not flush and smell.
• Application to male standing position.
• No touch using toilet to prevent bacteria cross contamination.
• Auto-induction-intelligent–control,

two-stage Flush (Small / Large Water Volume).

• No destruction of toile, No plumber or re–piping, requirem`ent.
• Battery–powered (DC Power), No AC Power required.
• Easy Instalation (DIY)
• To help those working places which always short of manpower on cleaning and maintenance to reduce the toilet dirty and unpleasant smell happen.

 3.Attentions / Precautions:
A. The wall behind the toilet must be more than 130cm away from the front facing surface.
B. The Sensor must not be obstructed by any objects in the front, or with objects on the top of the toilet water tank, as well as reflective surfaces.
C. The Sensor is automatically detecting the distance while the Sensor/ Power LED(center) is flashing. Please stay at least 130cm away from the Sensor to avoid interrupting the Sensor or cutting the induction distance short.

D. Please reset the Sensor if the induction distance detected is less than 60cm.         E.Please choose the other  Sensor(Model:QBH) to apply, if the toilet original flusher button is over 8cm high and the water tank cover is over 6cm thick.