How to choose a bathroom toilet?

Five things to consider when buying a toilet
1. Toilet weight When choosing a toilet, you can weigh the weight of the toilet with your hands. If the toilet is heavier, it means the density of the toilet is greater and the quality is better. According to relevant data, ordinary toilets on the market generally weigh about 50 kilograms, and good toilets generally weigh about 100 kilograms.
2. Check the toilet water parts
When choosing a toilet, you should check the material of the internal water parts. Generally, good toilet water parts are made of high-quality plastic, which has the characteristics of water resistance, corrosion resistance, and long service life. Usually, a toilet water part is Q It can be used for at least 3-5 years. Choosing good water fittings can extend the life of the toilet. You can refer to our toilet water fittings Q, a 20-year-old brand with guaranteed quality.
3. Glazed material
When choosing a toilet, you should check whether the glaze of the toilet is good. Generally, toilets with good quality have smooth glaze and full color. In addition, you should also touch the toilet sewer with your hands to see if the inside is smooth, so that pollutants are less likely to be left behind when using it.
4. Sewage discharge diameter
When choosing a toilet, you can put your whole hand into the mouth of the toilet to check the size of the sewage discharge diameter. Generally, the capacity of one palm is better. Such a large-diameter sewage pipe is not easy to get dirty and can discharge sewage quickly.
5. Flushing method
When choosing a toilet, be sure to check the flushing method. There are four flushing methods on the market, namely direct flushing, radial siphon, rotating siphon and vortex siphon. Different flushing methods have different flushing methods. and water-saving capabilities are different, so you must compare more when choosing, so that you can choose the most suitable toilet for you.

What is the reason why the toilet water tank does not fill with water? 1. There is a filter in the toilet water refill Q. If there is too much scale in the filter, it will become blocked, so the water cannot be filled. 2. There is a hose between the bottom of the water tank and the water supply pipe. If the hose is damaged or blocked in the middle, it will also prevent the water supply. 3. There is a spring under the buoy. If it loses its elasticity and cannot float automatically, it will also lead to the inability to get on the water.

How to solve 1. If it is really because the filter in the toilet water refiller is blocked, then first you need to close the valve at the lower water inlet pipe, and then drain the water in the current tank. Next, you need to find the location of the water refill and remove the water refill. Pull out the object from the middle square pillar to see the filter. Then rinse with clean water or scrub away the stains with a toothbrush. 2. If the problem is caused by a broken water pipe or a blockage in the middle, the solution can be simpler. In the same way, turn off the valve at the water supply pipe, remove the problematic hose, and replace it with a new hose. 3. When there is a problem on the float, it is usually the spring below that has lost its elasticity. After detecting drainage, the spring automatic detection will bounce up the float, and then form the effect of automatic water supply to the water supply pipe. Then after the spring loses its elasticity, it cannot float automatically, so there is no way to automatically supply water. The problem that needs to be solved at this time is to see if the spring is stuck, or try to replace it with a new spring.