Why does the toilet fill slowly after flushing?

The water in the toilet tank is slow to fill, what is the problem?
In life, you may encounter the problem that the water in the water tank is very slow: the toilet water tank keeps making noise, but it takes a long time to fill up. It’s fine when used by one person, but if two people in a row want to use it, the second person may not be able to flush it. So what is the reason for the slow filling of the water tank? Let’s take a look.

Water Inlet Valve If the toilet tank is filled with water, you may wish to check whether the water inlet switch of the drain valve is fully open. If not, turning it up to the maximum may solve the problem.
Water inlet pipe The water inlet pipe directly determines the amount of water in the toilet. Usually the toilet water inlet pipe is a quarter diameter, so as to ensure normal toilet water supply. If you find that the water inlet pipe is too thin, it needs to be replaced.

Water inlet pipe The water inlet pipe directly determines the amount of water in the toilet. Usually the toilet water inlet pipe is a quarter diameter, so as to ensure normal toilet water supply. If you find that the water inlet pipe is too thin, it needs to be replaced.

There is too much dirt on the filter. The water output of the toilet is closely related to the water output of the faucet. If the water output of the toilet faucet Q at home is small, it will lead to slow water supply. Check the filter of the water refill to see if there is a lot of dirt accumulated on it. If there is a lot of dirt on the filter, then we can take it off and clean it. The valve should be checked at the connection point of the water tank. Re-spraying water can allow the water in the water tank to be drained quickly.

Too much dirt in the pipes. If the toilet is used for a long time, a lot of dirt will accumulate in the pipes. If the dirt in the pipes accumulates to a certain extent, the water in the toilet will be slow. Therefore, you can inject some detergent with strong decontamination ability into the pipe, so that the toilet water pipe can be cleaned with the flow of water. After the scale is cleaned, the water supply speed will be faster, and regular replacement of the water pipe will also The problem can be solved and the cost is not high. Water pressure: The water pressure is too low, which usually occurs in high-rise residents’ homes. If there is no secondary water supply, the water pressure in high-rise residents’ homes will usually become special. At this time, you will find that the water output of various faucets in your home becomes very small, which also affects the toilet water tank.

Water tank accessories There is a float ball in the toilet water tank for water inlet and water stop. While keeping the water inlet valve open, directly press the float ball with your hand to see if water can still be filled in and stopped normally. If not, the water parts are faulty and must be replaced.