What to do if the toilet fails to flush?

There is no need to find someone to fix the problem of the toilet “not flushing”, you can solve it yourself
Have you encountered this situation? After using the toilet at home for a long time, you feel that there is no pressure to flush it. It often needs to be flushed two or three times to flush it clean. If it is not dealt with, it will affect our quality of life and reduce our living standards.
In fact, there are only three areas where the toilet cannot flush properly. Today, Weibo Bathroom will share with you how to solve the problem at home.
1. Toilet button

Most of the toilet buttons on the market today are push-type. If the flushing volume of the toilet becomes smaller, it is likely that there is a problem with the button device on the toilet. You need to open the water tank cover and then observe whether there is a problem with the button spring or the adjusting screw.

2. Drainage pipes
Another reason for the inability to flush the toilet is that there is dirt in the pipes, and the dirt adheres to the inner wall of the pipes. In this way, the pipes that were originally the size of a fist are only as thick as a finger, and the natural flushing force will become very weak. Then as long as Cleaning the pipes can make the momentum “bigger”. The method is very simple, just pour the pipe unblocking agent directly into the toilet, let it sit for 30 minutes, and then flush it with plenty of water.
3. toilet parts issue.
If there is a problem with the water inlet valve Q in the water tank, it will also cause the toilet to be unable to flush. Damage to the water inlet valve will result in less water entering the toilet tank and insufficient water pressure, which will also cause the toilet to be unable to flush. New water inlet valve accessories need to be replaced. In addition, problems with the drain valve in the water tank will also cause inability to flush. If the water sealing piece of the drain valve is worn, the water in the water tank will slowly flow into the toilet, resulting in insufficient water pressure in the water tank, and inability to flush will also occur. situation. The solution is to replace the drain valve accessories with new ones.

The above are some common problems caused by toilet flushing problems. I hope they can help you if you encounter problems.